Vapor Intelligent

The Highest Quality Vape and E – Cigarette

E Cigarette Starter Kits

ProVari V2.5 Satin – Red LED

This is the V2.5 VERSION with RED LED DISPLAY device

This is the NEW V2.5 VERSION with RED LED DISPLAY device, with a new updated design.

Image result for ProVari V2.5 Satin - Red LED

The voltage ranges from 2.9v-6.0v and amperage limit of 3.5A. The ProVari gives you an outstanding performance range, versatility and a range of high quality features detailed below.

ENjuice are delighted to bring to the UK the very best in personal vapourisers from US industry leaders ProVape. From our experience of using a wide to range of devices, the ProVari Variable Voltage personal vapouriser is in a class of its own…. quality, style and above all performance that can be accurately and quickly adjusted to your own personal preference.

If you’re tired of good vapour at the start of a new battery and weak vapour at the end, then the ProVari Variable Voltage e-cig is for you! The ProVari is a microprocessor controlled variable voltage e-cig that lets you adjust the voltage in seconds with just a few presses of a button. Now you can select the perfect settings for your atomiser, cartomiser and ENjuice e-liquid!

The ProVari Variable Voltage ecig has a regulated output which keeps your selected voltage the same with each puff regardless of your remaining battery power. As the battery drains, the ProVari will keep the voltage consistent giving you the perfect vapour throughout the day. The ProVari’s variable voltage can be adjusted from 2.9 – 6.0 volts in 0.1 volt increments.

This is the Satin Stainless Steel Finish Model for easy to maintain durable good looks.

The ProVari comes with a one year warranty. The warranty is issued by ENjuice Ltd in association with ProVape Inc. and is valid for the original purchase from ENjuice – it is not transferable to third parties.

The ProVari has numerous features and monitors built-in:

On/Off Mode
You can put the ProVari in standby mode so it will not turn on the atomizer when the button is pressed.
This safety feature prevents the atomizer from turning on while it’s in your pocket or bag and it prevents any settings from getting changed without you knowing.

16 Second Cutoff
If the button is held down for 16 seconds or longer, the ProVari will shut itself off until the button is released.
If you forget to turn it off before storing it in your pocket or bag, this protects you and prevents the device from activating.

Short Circuit/Atomizer Protection
This protects the ProVari against shorted atomizers/cartomizers.

Reverse Battery Protection
Protects against reverse battery installation.

Battery Monitoring/Over-Discharge Protection
The ProVari monitors the battery voltage and will automatically turn off when the battery is discharged.

Amperage Limiting to 3.5 amps
The ProVari will monitor and shut itself off if it detects any excessive over-current conditions.

ProVari with AccuSet™ technology
Our built-in dynamic self-calibration algorithm keeps the output voltage accurate to 1% or better over the life of the product. The ProVari will constantly monitor and adjust itself to ensure you always get accurate voltage settings. Now a ProVari owner can tell another ProVari owner to try a certain voltage setting with their favorite brand and flavor of e-liquid and the flavor experience can be shared.
Every device will autotune itself so it’s always precise!

One Battery Makes it Better The standard ProVari takes a single 18490 battery. We recommend using only AW IMR High Drain batteries to maximise the performance of your ProVari. The ProVari uses a special boost circuit to adjust the voltage to your desired level and it only needs a single battery to operate.

Single battery devices are the safest electronic cigarettes you can own! We recommend only using AW IMR high drain batteries in your ProVari. You must use batteries that have a positive nipple on the top. Flat top batteries will not work.

Optional: There is an optional 18650 battery adapter available. Add a longer battery to your ProVari for extended run times. When purchasing this option you will still get the original end cap so you can also use the 18490 battery.

We offer the base unit without batteries, charger, atomiser, cartomisers or drip tip. All of these items can be added to enable you build a kit that meets your own needs.

Detailed information on the ProVari Features and the other items on this page can be found by clicking the “Specifications” tab